Wood Stains, Patinas & Grain Fillers

Morrells - The Home of Wood Finishes

Morrells provides a bespoke colour matching service for all stains and patinas

chart2

Light Fast Stains

A spirit based stain suitable for spray, dip and hand application. Formulated to provide excellent grain definition and depth of colour on all wooden substrates including floors. This range can be used to tint Morrells Precatalyst and Acid Catalyst lacquers up to a maximum of 5% by volume.

  • Pack sizes available: 1L, 5L and 25L
  • Touch dry: 15 – 30 minutes @ 18°C
  • Coverage: Approximately 40 – 60m2 per 5 litres dependent upon the size,
    orientation and surface quality of the item being coated.

Product Codes - LFS.

Data Sheet 01 - Light Fast Stains

Fields marked with a * are required

Classique Stains – Spray & Wipe

A range of slower drying solvent-based stains suitable for hand, spray or dip application. Formulated to provide excellent grain definition and depth of colour. This range is also suitable for tinting Morrells Cellulose and Precatalyst Lacquers up to a maximum of 5% by volume.

  • Pack sizes available: 5L and 25L
  • Touch dry: 20 mins minimum @ 18°C.
  • Coverage: Approximately 40 – 60m2 per 5 litres dependent upon the size,
    orientation and surface quality of the item being coated.

Product Codes - SW

Data Sheet 02 - Classique Stains

Fields marked with a * are required

Classique Stains – Spray & Leave

chart

A range of fast drying solvent-based stains suitable for hand, spray or dip application. Formulated to provide excellent grain definition and depth of colour. this range is also suitable for tinting Morrells cellulose and precatalyst lacquers up to a maximum of 5% by volume.

  • Pack sizes available: 5L and 25L
  • Touch dry: 20 mins minimum @ 18°C.
  • Coverage: Approximately 40 – 60m2 per 5 litres dependent upon the size,
    orientation and surface quality of the item being coated.

Product Codes - SL

Data Sheet 02 - Classique Stains

Fields marked with a * are required

Compliant Water Stains

A range of water-based stains suitable for hand, spray or dip application. The standard range consists of popular primary colours and a selection of the most widely used wood colours. Formulated on organic metal-complex dyestuffs dissolved in water which comply with the VOC requirements of Clause 19 of the Secretary of States Guidance Note for Wood Coating Processes PG6/33 (11) appendix 2.

  • Pack sizes available: 5L and 25L
  • Touch dry: 10-20 mins minimum @ 18°C.
  • Overcoat: 2 hours minimum @ 18°C.
  • Coverage: Approximately 40 – 60m2 per 5 litres dependent upon the size,
    orientation and surface quality of the item being coated.

Product Guide - CWS

Data Sheet 03 - Compliant Water Stains

Fields marked with a * are required

Patinas

chart2

Patinas are spray applied over a lacquer coat or sealer to achieve authentic aged and distressed effects. A feathered removal of the coating is required to achieve the best results.

  • Pack sizes available: 5L
  • Touch dry: 5 minutes
  • Overcoat: 30 minutes
  • Coverage: 40m2 per 5 litres

Product Guide - Patinas

Data Sheet 04 - Patinas

Fields marked with a * are required

Grain Fillers

Morrells Grain Fillers are designed to fill the open grain of timbers like mahogany and oak; they are always applied after any base staining operation. Always consult Morrells technical service department prior to the use of these materials.

  • Pack sizes available: 1.5kg & 7kg
  • Touch dry: 4 hours minimum @ 18°C
  • Overcoat: Leave 24 hours for best results
  • Coverage: 40m2 per 7 kilos

Product Guide - GF

Data Sheet 05 - Grain Fillers

Fields marked with a * are required

Close
loading...