A high quality 25% solids FIRA Standard 6250: 2005 General Use Lacquer for manual or automatic spray application, coat-on-coat or over 9004/250 precatalyst basecoat. Also available in a ‘waxy feel’ version.
A premium 28% solids lacquer formulated to give a fuller finish with fewer coats and to prevent aeration on deep-grained timbers such as crown-cut mahogany. Can be used either over 9004/280 basecoat or coat-on-coat. Meets the requirements of FIRA standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) in General Use.
A high build 32% solids fast drying Precatalyst Sealer specifically formulatedfor use on MDF substrates. Due to the nature of the solvents utilised this product will not encourage the dissolution of waxes at the MDF surface. Suitable for use under all Morrells clear and pigmented Precatalyst topcoats. Excellent hold-up on MDF edges and easy to sand. Also available in a cellulose version for rapid drying and improved hold up when spraying MDF vertical surfaces (2004/300).
A very fast drying, high opacity range of durable single pack interior coatings suitable for all areas where resistance to aggressive abrasion, heat or chemical attack is not required. Available in White (BS 00-E-55) Black (BS00-E-53) and a wide spectrum of Fastmatch® colours (see Fastmatch®).
A fast drying easy to sand, single pack primer with good covering power. Formulated for use on MDF and suitable for all wooden substrates. Ideal for overcoating with Fastmatch® Pre-catalyst Colours. Also available in Dark Grey (278/606) and Black (968/W02C).