omnia exterior joinery coatings

Morrells - The Home of Wood Finishes

omnia_section

omnia exterior joinery coatings

It takes a remarkable wood finish to withstand penetrating frost, lashing rain, intense uv rays and damaging rot attack.

omnia is the modern solution…a true breakthrough in aqueous polymer technology.

omnia by Morrells offers many years protection against the elements as long as timber selection, preparation and design meet TWA scheme criteria & requirement standards, and the application of the coatings are in accordance with the appropriate Morrells product data and/or specification. Very exposed or coastal locations can reduce the longevity of all exterior coatings. For this reason annual inspections and maintenance must be carried out with the omnia maintain range of products.

For full details on finishing exterior joinery please consult or download ‘Morrells practical guide to joinery finishing’ before starting any new project.

 

omnia Preserve

A clear waterborne timber treatment with specific additives which protect the structure of the wood and actively control discolouration. omnia preserve is formulated to provide surface protection against rot and fungal attack meeting BS335 Hazard Classes 2 & 3.

omnia preserve is a completely clear liquid and is also available in 9 standard wood stain colours.

  • Pack sizes: 5L & 25L
  • Touch dry: 90 mins @ 18°C.
  • Recoatable: 2-4 hours @ 18°C.
  • Coverage: 70m2 per 5 litres
  • Packing: Overnight

omniaPC

Data Sheet 47 & 55 - Omnia Preserve & Wood Treatment

Fields marked with a * are required

Use omnia end grain sealer 8ES/000 on all exposed end grain. Application of 1 wet coat by brush is sufficient for optimum protection.

 

8ES/000 End Grain Sealer

A waterborne sealer used to reduce moisture absorption and close the porosity of timber end grain. This product must be used as part of the recommended Omnia system. 8ES/000 is a high viscosity productdesigned for brush application and formulated to achieve good penetration, flexibility and moisture repellence.

  • Touch dry: 90 mins @ 18°C.
  • Sandable: 2 to 4 hours @ 18°C. Use 180 or 240 Silicone Carbide paper
  • Recoatable: 2-4 hours @ 18°C.

omnia Clear

A unique clear topcoat with hybrid-microporous technology and UV diffusers giving unrivalled weather resistance. The structure of the wood is actually protected from long term UV damage. Available in Semi-matt 30% sheen or 60% gloss. A vacuum-coat version is also available for linear mass production.

  • Pack sizes: 4.6L & 23L
  • Touch dry: 90 mins @ 18°C.
  • Recoatable: 2-4 hours @ 18°C.
  • Coverage: 20m2 per 5 litres
  • Packing: Overnight

Spray application of 2 full coats @ 300 microns wet over timber pretreated with omnia preserve will give full protection.

omniaclearPC

Data Sheet 49 - Omnia Clear

Fields marked with a * are required

omnia Prime

A high build fast-dry waterborne white primer with excellent covering power and easy sanding. This product locks-in the staining effects of tropical hardwoods and other timbers rich in tannin and natural extractives. omnia knotting (3032/000) and omnia preserve (8PR/000) should be used on softwoods prior to priming. A vacuum-coat version is also available for linear mass production. Also available in cream and light grey.

  • Pack sizes: 5L & 20L
  • Touch dry: 110 mins @ 18°C.
  • Recoatable: 2-4 hours @ 18°C.
  • Coverage: Approx 20m2 per 5 litres dependent upon the size, orientation and surface quality of the item
  • Packing: Overnight minimum

Spray application of 1 or 2 coats to 150 microns wet per coat will afford a sufficient priming coat

Use omnia end grain sealer 8ES/000 on all exposed end grain.

omniaPrimePC

Data Sheet 50 - Omnia Prime

Fields marked with a * are required

omnia White & Colours

A high opacity waterborne acrylic polyurethane topcoat with an ultrasmooth finish, superior gloss retention and outstanding weather resistance.

Available in white plus all BS, RAL & NCS or customer bespoke colours in semi-matt 30% or 60% gloss sheens.

A vacuum-coat version is also available for linear mass production.

  • Pack sizes: 4.6L & 23L
  • Touch dry: 90 mins @ 18°C.
  • Sandable: 2-4 hours @ 18°C..
  • Recoatable: 2-4 hours @ 18°C.
  • Coverage: Approx 20mper 5 litres dependent upon the size, orientation and surface quality of the item
  • Packing: Overnight minimum

Spray application of 2 coats at 300 microns wet will afford full protection.

omniaWhite

Data Sheet 52 - Omnia White & Colours

Fields marked with a * are required

Data Sheet 54 - End Grain Sealer

Fields marked with a * are required

 

 

 

 

Close
loading...